Bluesky MCP Server & CLI

A free, open source Bluesky MCP server and CLI that lets Claude Code, Codex, Cursor and other AI agents post, read, search and manage your Bluesky account.

githubStar on GitHubnpmnpm
Navid Moazzezby Navid Moazzez·Updated Oct 5, 2026·14 min read·
MCPCLI
Your computer
macOSWindowsLinux
  1. 1

    Add it with a single command in a terminal.

    Put your own handle and app password in place of the examples.

    claude mcp add bluesky \
      -e BLUESKY_IDENTIFIER=you.bsky.social \
      -e BLUESKY_APP_PASSWORD=xxxx-xxxx-xxxx-xxxx \
      -- npx -y @thenavidm/bluesky-mcp-cli@latest
  2. 2

    In Claude Code, type /mcp. Bluesky should show as connected.

    /mcp

Needs Node 22 or newer, plus a Bluesky app password for anything that acts as you. Get one in a minute.

It's free and open source. If it saves you time, star it on GitHub, so more people find it.

Rate this tool

This free Bluesky MCP server and CLI gives your AI real access to your Bluesky account. It can post, read your timeline, search, follow and check what worked.

It's one install with two ways in. Claude, Codex, Cursor or any other MCP app calls its 45 tools for you, and the same tools work as a CLI that agents like Claude Code, Codex and OpenCode run, or that you type yourself.

In this guide, I'll show you:

  • What the Bluesky MCP server & CLI is, and what you can ask it
  • How to install it and check that it works
  • When to use the MCP server, and when the CLI
  • Every tool, and how to keep your account safe

Every tool on this page comes from the server itself, and every cost was measured in Claude Code.

key_takeaways.mdTL;DR

Key takeaways

It gives Claude, Codex, Cursor and any other MCP app 45 tools to post, read, search and manage your Bluesky account.
The same tools run as a CLI, which costs your AI nothing until it runs.
Posts, threads, deletes and blocks wait for your approval, and read-only mode hides every write.
You connect with an app password you can revoke, never your real password.

What is the Bluesky MCP server & CLI?

The Bluesky MCP server & CLI is a free, open source program that lets AI agents act on Bluesky for you, in two ways. The MCP server is what an AI app like Claude, Codex or Cursor connects to, through MCP (Model Context Protocol), the open standard AI apps use to call outside tools.

You ask in plain language. Your AI picks the right tool, and the server makes the call to Bluesky.

The CLI is the same program as commands. bluesky-cli get-timeline runs the same code your AI runs when you ask about your timeline, whether an agent like Claude Code runs it or you do.

In an AI OS, the layer that connects your AI to your context, your data and your tools, a server like this is how your AI reaches Bluesky. I explain how the parts fit together in how to build an AI operating system, and here's how I use AI myself.

What can you ask it?

Once it's set up, you ask the way you'd ask a person. These are real prompts it handles:

Try asking
Post this, and put the link in a card rather than as bare text.
Turn these notes into a thread. Show me the draft first.
What did my timeline talk about in the last 12 hours?
Read the replies to my Tuesday post and tell me which ones deserve an answer.
Study @someone's last 100 posts and tell me what gets engagement for them, relative to their follower count.
Which of my posts got quoted more than they got reposted?

The last one shows why this is useful. Bluesky counts quotes, reposts and replies separately, and a post quoted more than it's reposted usually means people disagreed.

It works well next to my Threads MCP server and Mastodon MCP server, so your AI can post the same update to Threads and share it on Mastodon in the same chat. Every server I've made is on my MCP servers page.

For the posts themselves, my free Bluesky character counter and Bluesky post analyzer help too.

How to install the Bluesky MCP server

Pick your app in the box at the top of this page. Each one is a single command or a pasted block, and they all run through npx, so there's nothing to install first.

Windsurf, Zed and Cline take the same server, though they don't have a tab in the box yet. Follow the box's Cursor tab, and put its block here instead:

AppWhere the block goes
WindsurfIn the Cascade panel, open the Actions menu (…) and choose Open MCP config file, then paste the block.
ClineClick the MCP Servers icon in the Cline panel, open the Configure tab, click Configure MCP Servers, and paste the block.
ZedGo to Settings, then AI, then MCP Servers, and choose Add Server, then Add Local Server. Enter the block's command, arguments and variables, and Zed saves them under context_servers.
Before you start0/3

Pro tip: Most reading works with no password at all. Profiles, other people's posts, threads, custom feeds and trends all answer without one.

Set up your Bluesky account

Bluesky has app passwords: separate passwords you make for one program and can revoke at any time. Never give the server your real password.

Set up your app password0/4

Your handle needs its domain. alice won't resolve, and alice.bsky.social will.

Or let your AI set it up

Your AI can't make the app password for you, but it can walk you through it and do the rest. Paste this into Claude Code, Codex or any agent that can run commands:

Set up the Bluesky MCP server
Set up the Bluesky MCP server for me.

1. Tell me to open https://bsky.app/settings/app-passwords, sign in, click Add App Password, name it "mcp", and paste the xxxx-xxxx-xxxx-xxxx value back to you. You cannot do this part yourself, so stop and wait for it.
2. Ask me for my full Bluesky handle, including the domain, e.g. me.bsky.social.
3. Register the server with my MCP client, passing BLUESKY_IDENTIFIER and BLUESKY_APP_PASSWORD as environment variables. For Claude Code that is:
   claude mcp add bluesky -e BLUESKY_IDENTIFIER=<handle> -e BLUESKY_APP_PASSWORD=<password> -- npx -y @thenavidm/bluesky-mcp-cli
   For any other client, write the equivalent JSON into its MCP config file.
4. Run `npx -y @thenavidm/bluesky-mcp-cli doctor --network` and show me the output.
5. If every line has a check mark, tell me to restart the client. If any line has a cross, tell me what it says and what to do about it. Do not try to guess my password or handle, and do not post anything.

It stops at step 1 and waits, because only you can create the app password.

Check that it works

Run the doctor with --network. It reaches Bluesky's public API, signs in to each account, reads your profile, and checks that the app password can post, without posting anything. Anything that fails comes with its fix.

npx -y @thenavidm/bluesky-mcp-cli doctor --network

When every line has a check mark, restart your app and ask it who you are on Bluesky. A cross on the sign-in check usually means the app password was mistyped.

In Claude Code, /mcp also shows whether the Bluesky server is connected. It's one of the Claude Code commands worth knowing.

Use the Bluesky CLI

The CLI is the same 45 tools as commands. AI agents that run commands, like Claude Code, Codex and OpenCode, use it on their own, and you can type the same commands in a terminal or a script. Every tool name becomes a command with dashes, so create_post runs as bluesky-cli create-post.

npm install -g @thenavidm/bluesky-mcp-cli
bluesky-cli
bluesky-cli get-author-feed --actor navid.me
bluesky-cli search-posts "model context protocol"
bluesky-cli create-post --text "Shipped." --confirm

The bare bluesky-cli lists every command, bluesky-cli which <words> finds the command for a task, and bluesky-cli <command> --help shows what a command takes. Posting, deleting and blocking need --confirm, the terminal's version of your approval.

bluesky-cli install <app> adds the server to Claude Code, Codex, Claude Desktop, Cursor, VS Code or Gemini CLI, in each app's own format.

These are the flags you'll use most:

FlagWhat it does
--jsonPrints JSON
--compactPrints the JSON on one line
--select a,b.cKeeps only those fields, and a dotted path goes deeper
--agentMachine mode: compact JSON, no prompts, and it never confirms anything
--confirmLets a write that asks first go ahead
--dry-runShows what a write would do, without doing it

A script can branch on the exit code:

Exit codeWhat it means
0It worked
1Something unexpected went wrong
2The command was typed wrong, or a write needed --confirm
3It wasn't found
4Bluesky rejected the credentials
5Bluesky failed or couldn't be reached
7You hit a rate limit, so wait and try again
10Nothing is set up yet

MCP server or CLI: which one?

Both are the same program with the same 45 tools. The difference is when your AI pays for them, in the tokens it reads.

Every message, in an app that loads every tool
MCP server
14,200 tokens
CLI
Nothing
Every message, in Claude Code
MCP server
1,100 tokens
CLI
Nothing
When Bluesky comes up
MCP server
Nothing more, or in Claude Code the tools it picks
CLI
2,000 tokens, once
20 messages with Bluesky in one, every tool loaded
MCP server
284,000 tokens
CLI
2,000 tokens
Works in Claude Desktop's chat
MCP server
Yes
CLI
No, there's no terminal there
Works in a script, a cron job or CI
MCP server
No
CLI
Yes

An app that loads every tool up front sends the full list with every message, whether you mention Bluesky or not. Claude Code doesn't by default: its tool search sends only the tool names and the server's instructions, and loads a tool's full definition when your AI reaches for it.

The CLI costs nothing until Bluesky comes up. Then your agent reads its skill file once and runs the commands it needs. With the skill added, Claude Code also lists its one-line description with every message, about 150 tokens.

When the whole conversation is about Bluesky, the gap closes. Then the MCP server is the better experience, because you ask in plain language and your AI never has to look up a command.

Where the MCP server's tokens go

Part of the tool listShare
JSON Schema structure, like types, required lists and nesting60%
Argument descriptions27%
Tool descriptions13%

60% of it is MCP writing every tool out as JSON Schema, which any server with this many tools pays. The rest is the wording that lets your AI use each tool without guessing.

How to spend less

In Claude Code, leave tool search on, which it is unless you've set ENABLE_TOOL_SEARCH=false.

Turn the server off when you aren't using Bluesky. In Claude Code that's the /mcp panel, and every AI app has its own switch. BLUESKY_READ_ONLY=1 cuts it to the 30 reading tools.

Or install the CLI and connect the server later, on the days it earns its place. Every tool stays in reach, and the standing cost drops to nothing.

Every number here was measured on October 5, 2026 in Claude Code 2.1.286 with Claude Opus 5.5. It's the same one-line prompt with and without the server connected, once with tool search off so every tool loads, and once with Claude Code's default. The skill was measured the same way, and other apps and models count tokens a little differently.

Every Bluesky tool

The tables below list all 45 tools, grouped the way the repo groups them. Of these, 30 only read, and 15 change something on your account.

Posting

create_post
What it does
Publish a post.
Kind
Asks first
create_thread
What it does
Publish several posts as one thread, each replying to the last.
Kind
Asks first
delete_post
What it does
Delete one of your own posts.
Kind
Asks first
get_post_thread
What it does
Read a post together with the conversation around it: everything above it and the replies below.
Kind
Reads

Reading posts

get_timeline
What it does
Your following feed, newest first.
Kind
Reads
get_author_feed
What it does
Posts by one account, newest first.
Kind
Reads
get_liked_posts
What it does
Posts a connected account has liked, newest first.
Kind
Reads
get_post_likes
What it does
The accounts that liked a specific post, newest first.
Kind
Reads
get_reposted_by
What it does
The accounts that reposted a specific post.
Kind
Reads
get_quotes
What it does
Posts that quote a specific post.
Kind
Reads

Search and feeds

search_posts
What it does
Full-text search across public posts.
Kind
Reads
search_actors
What it does
Find Bluesky accounts by name, handle or bio text.
Kind
Reads
search_feeds
What it does
Find custom feeds, meaning the algorithmic feeds anyone on Bluesky can publish.
Kind
Reads
get_feed
What it does
Read posts from a custom feed by its at:// URI or bsky.app link.
Kind
Reads
get_pinned_feeds
What it does
The feeds and lists pinned to a connected account's home screen, in order.
Kind
Reads
get_list_posts
What it does
Posts from the accounts on a curated list, newest first.
Kind
Reads
get_trends
What it does
Current trending topics on Bluesky, each with the feed link that shows the posts behind it.
Kind
Reads
get_suggested_follows
What it does
Accounts Bluesky suggests following.
Kind
Reads

Likes, reposts and follows

like_post
What it does
Like a post.
Kind
Writes
unlike_post
What it does
Remove your like from a post.
Kind
Writes
repost
What it does
Repost a post to your followers.
Kind
Writes
unrepost
What it does
Remove your repost of a post.
Kind
Writes
follow
What it does
Follow an account by handle or DID.
Kind
Writes
unfollow
What it does
Stop following an account.
Kind
Writes
mute_account
What it does
Hide an account's posts from your feeds without them knowing.
Kind
Writes
unmute_account
What it does
Stop hiding an account's posts.
Kind
Writes
block_account
What it does
Block an account.
Kind
Asks first
unblock_account
What it does
Remove a block.
Kind
Writes
set_reply_permissions
What it does
Change who is allowed to reply to one of your existing posts, after it is already published.
Kind
Writes

Profiles and lists

get_profile
What it does
Full profile for one or more accounts: bio, follower counts, labels, and, when a connected account is available, whether you follow them and whether they follow you.
Kind
Reads
get_followers
What it does
Accounts that follow a given account, newest first.
Kind
Reads
get_follows
What it does
Accounts a given account follows.
Kind
Reads
get_relationships
What it does
For each account named, whether a connected account follows them and whether they follow back.
Kind
Reads
get_lists
What it does
Curated lists an account has created.
Kind
Reads
get_list_members
What it does
The accounts on a curated list.
Kind
Reads

Notifications

get_notifications
What it does
Your likes, reposts, follows, mentions, replies and quotes, newest first.
Kind
Reads
get_unread_count
What it does
How many notifications have arrived since you last marked them seen.
Kind
Reads
mark_notifications_seen
What it does
Mark every notification up to now as seen, so the unread count resets.
Kind
Writes

Analytics

rank_posts
What it does
Your posts, best first, with likes, reposts, replies and quotes for each.
Kind
Reads
get_post_stats
What it does
Likes, reposts, replies and quotes for a single post, by URL or at:// URI.
Kind
Reads
get_engagement_summary
What it does
Totals, averages and engagement rate across recent posts, broken down by format so you can see whether images or video actually earn their effort.
Kind
Reads
get_posting_patterns
What it does
Your posting times crossed with the engagement they earned, by hour and by weekday, so 'when should I post' is answered from your own account rather than a generic chart.
Kind
Reads

Accounts

list_accounts
What it does
List every Bluesky account this server can act as.
Kind
Reads
whoami
What it does
Authenticate and return the live profile for a connected account, including follower counts.
Kind
Reads
get_video_job_status
What it does
Check a Bluesky video transcoding job by id.
Kind
Reads

Is the Bluesky MCP server safe?

A post is public the moment it lands, and deleting it doesn't pull it out of feeds that already have it. So four tools ask first. They're the ones marked "Asks first" in the tool tables above.

When your AI calls one of them, the call needs a yes first. Where you use it decides who gives it:

  • Claude Code (2.1.246 and later) asks you before every call, in every one of its permission modes.
  • An app that can show forms asks you in a form.
  • Any other app takes your AI's confirm: true as the yes, so tell your AI to check with you first.
  • An agent with no person to ask needs BLUESKY_CONFIRM=model, so its confirm: true counts in every app.
  • In a terminal, you add --confirm to the command.

If the answer is no, nothing reaches Bluesky.

Likes, reposts, follows and mutes don't ask first, because each is one click to undo. Asking on every like would only train your AI to pass the check without thinking.

Make it read-only

Set BLUESKY_READ_ONLY=1 and every write disappears from the tool list, leaving 30 reading tools. Your AI can't call a tool it can't see.

BLUESKY_ALLOW_DESTRUCTIVE=0 is the middle setting. Likes and follows still work, and posting, deleting and blocking don't.

Keep a log of every write

Set BLUESKY_AUDIT_LOG to a file path. The server writes one line per attempted write, allowed or blocked, with the time, what it was about to do and who approved it.

Watch out: Everything your AI reads from Bluesky was written by other people, and a post can try to give it orders. The server tells your AI to treat it as data, but BLUESKY_READ_ONLY=1 is the real defense for an agent reading other people's posts.

Your data

Nothing goes anywhere but Bluesky. Your app password stays in your app's config or your shell, session tokens stay in memory and are never written to disk, and there's no tracking of any kind.

To disconnect, delete the app password at bsky.app/settings/app-passwords. That cuts access right away, and nothing else about your account changes.

Connect more than one Bluesky account

A personal handle and a brand handle both work from one server, with no restart to switch. Get an app password for each account, then set them together:

export BLUESKY_ACCOUNTS='[{"handle":"you.bsky.social","app_password":"xxxx-xxxx-xxxx-xxxx"},{"handle":"brand.example.com","app_password":"yyyy-yyyy-yyyy-yyyy"}]'
export BLUESKY_DEFAULT_ACCOUNT=you.bsky.social

Every tool that acts as you takes an optional account, so you can say which handle posts. Your AI calls list_accounts when it isn't clear which one you mean.

Bluesky MCP server settings

Every setting is an environment variable, in your app's config or your shell.

BLUESKY_IDENTIFIER
Default
none
What it does
Sets your full handle
BLUESKY_APP_PASSWORD
Default
none
What it does
Sets an app password, never your account password
BLUESKY_SERVICE_URL
Default
https://bsky.social
What it does
Points at your PDS, if you host your own
BLUESKY_ACCOUNTS
Default
none
What it does
Lists several accounts, as JSON
BLUESKY_DEFAULT_ACCOUNT
Default
the first one
What it does
Picks the handle that acts when a tool names none
BLUESKY_READ_ONLY
Default
0
What it does
1 hides every write
BLUESKY_ALLOW_DESTRUCTIVE
Default
1
What it does
0 blocks posting, deleting and blocking
BLUESKY_AUDIT_LOG
Default
none
What it does
Logs every attempted write to a file
BLUESKY_REQUEST_TIMEOUT_MS
Default
30000
What it does
Sets how long a request can take
BLUESKY_MAX_RETRIES
Default
3
What it does
Retries after a rate limit or a server error
BLUESKY_MIN_REQUEST_INTERVAL_MS
Default
120
What it does
Spacing between requests
BLUESKY_PUBLIC_API
Default
https://public.api.bsky.app
What it does
Public API for reads that need no account
BLUESKY_VIDEO_SERVICE
Default
https://video.bsky.app
What it does
Video upload service
BLUESKY_VIDEO_SERVICE_DID
Default
did:web:video.bsky.app
What it does
The video service's DID
BLUESKY_USER_AGENT
Default
bluesky-mcp
What it does
Sent on every request
BLUESKY_SURFACE
Default
full
What it does
search lists three tools that find, describe and run the rest
BLUESKY_TOOL_TIMEOUT_MS
Default
none
What it does
Gives up on any tool after this many milliseconds
BLUESKY_CONFIRM
Default
human
What it does
model lets your AI's confirm: true approve on its own, for an agent with no person to ask
BLUESKY_HTTP_PORT
Default
8787
What it does
Sets the port for --http
BLUESKY_HTTP_HOST
Default
127.0.0.1
What it does
Sets the address for --http, and any other needs a token
BLUESKY_HTTP_TOKEN
Default
none
What it does
Sets the bearer token every --http request needs
BLUESKY_HTTP_ALLOWED_ORIGINS
Default
none
What it does
Lists other websites allowed to call --http, comma separated
BLUESKY_DEBUG
Default
off
What it does
1 prints debug lines

Troubleshooting

Run the doctor first. It names the step that failed and the fix.

What you seeWhat to do
"Bluesky rejected the credentials"You used your account password. Make an app password instead
"No account resolves for …"Add the domain to your handle: alice.bsky.social, not alice
search_posts returns 403Searching posts needs a signed-in account, so set up an app password
"Image is 2.4MB; Bluesky's limit is 1MB"Make the image smaller and try again
"…so it will not run without confirm: true"That's the safety check working. Approve it when your app asks, or say you want it posted
Rate limitedBluesky limits writes per hour and per day, so wait and try again

If the server doesn't show up in your app at all, run the command your app runs, in a terminal, and read the error.

More free Bluesky tools

Check a post's length before your AI sends it, or turn a post into an image to share.

Free tools

Bluesky character counterBluesky post analyzerBluesky bio generatorBluesky image resizerEngagement rate calculatorViral hook generator

MCP servers

Threads MCP server & CLIMastodon MCP server & CLI

FAQs about the Bluesky MCP server & CLI

Here are the questions people ask most about the Bluesky MCP server and CLI.

The Bluesky MCP server & CLI is a free, open source program that lets an AI app like Claude, Codex or Cursor act on your Bluesky account.

It has 45 tools for posting, threads, replies, your timeline, search, custom feeds, lists, notifications and follows, and the same tools run as a CLI that agents like Claude Code and Codex use, or that you type yourself.

An MCP server is a standard way to give an AI app real access to a tool, so it can act instead of guessing.

MCP stands for Model Context Protocol, and Claude, Codex, Cursor and many other AI apps speak it.

The Bluesky CLI is the same program as the Bluesky MCP server, run as commands.

AI agents like Claude Code, Codex and OpenCode run them for you, and you can type them in a terminal or a script.

Every tool is a command with dashes, so create_post runs as bluesky-cli create-post, and one npm package installs both.

Use the Bluesky MCP server in an AI app with no terminal, like Claude Desktop's chat, and the CLI in a terminal, a script or a cron job.

In an AI app that can run commands, like Claude Code, Codex or Cursor, the CLI is the lighter choice, because it costs nothing until it runs.

Yes, the Bluesky MCP server is free and open source under the MIT license.

Bluesky's API is free too, so the only thing you pay for is your own AI app.

No, you don't need a developer account.

Bluesky has no developer portal and no app to register, so your handle and an app password are all the Bluesky MCP server needs.

The Bluesky MCP server uses an app password because you can revoke it on its own, and it can't change your email or your real password.

Never put your account password in the config.

The Bluesky MCP server posts only when you ask.

Posting, threads, deleting and blocking wait for your approval in an app that can ask, like Claude Code, and read-only mode removes every write so your AI can't see them at all.

The Bluesky MCP server works with any app that speaks MCP.

That includes Claude Code, Claude Desktop, Codex, Cursor, VS Code, GitHub Copilot CLI, Gemini CLI, OpenCode, OpenClaw, Antigravity and Hermes, with the same package and the same settings.

Yes, the Bluesky MCP server connects as many accounts as you set up.

Every tool takes an optional account, and a default decides which one acts when you don't say.

To disconnect the Bluesky MCP server, delete its app password in Bluesky's settings, which cuts access right away.

Then remove the server from your AI app's config.

I did.

I'm Navid Moazzez, and I made the Bluesky MCP server & CLI as one of my free tools on navid.me.

You can read more about me.

The code is on GitHub under the MIT license, and the package is on npm.

More MCP servers & CLIs

View all

Threads MCP server & CLI

Post, reply and read your insights on Threads from Claude, Codex or Cursor.

Social mediathreadsThreads

Mastodon MCP server & CLI

Post, edit and read your timelines on any Mastodon instance from Claude, Codex or Cursor.

Social mediamastodonMastodon

Substack MCP server & CLI

Draft posts, publish Notes and check your stats on Substack from Claude, Codex or Cursor.

NewsletterssubstackSubstack

TikTok MCP server & CLI

Rank your videos, read your stats and publish to TikTok from Claude, Codex or Cursor.

Social mediatiktokTikTok

ThriveCart MCP server & CLI

Check revenue, customers, subscriptions and affiliates in ThriveCart from Claude, Codex or Cursor.

SalesThriveCart

WordPress MCP server & CLI

Edit posts, pages, Elementor and Rank Math SEO on WordPress from Claude, Codex or Cursor.

BlogsWordPress

Midjourney MCP server & CLI

Generate images, follow jobs and download the files from Midjourney with Claude, Codex or Cursor.

AI imagesMidjourney

Google Photos MCP server & CLI

Pick photos, build albums and upload to Google Photos from Claude, Codex or Cursor.

PhotosGoogle Photos

Apple Photos MCP server & CLI

Search, look at and organize your Apple Photos library from Claude, Codex or Cursor, on your Mac.

PhotosApple Photos

Apple Podcasts MCP server & CLI

Track chart ranks, read reviews and search your podcast library from Claude, Codex or Cursor.

Podcastsapple-podcastsApple Podcasts

Podcast Index MCP server & CLI

Search 4 million podcasts and read episode transcripts from Claude, Codex or Cursor.

PodcastsPodcast Index

Google Search Console MCP server & CLI

Read your search traffic, check indexing and submit sitemaps from Claude, Codex or Cursor.

SEOGoogle Search Console

Google Workspace MCP server & CLI

Work across Gmail, Drive, Sheets, Docs and Calendar from Claude, Codex or Cursor.

ProductivityGoogle Workspace

iMessage MCP server & CLI

Catch up, search your history and send iMessages from Claude, Codex or Cursor, on your Mac.

MessagingiMessage

Facebook MCP server & CLI

Read your Page insights, schedule posts and moderate comments, from Claude, Codex or Cursor.

Social mediafacebookFacebook

Facebook Ad Library MCP server & CLI

Research the ads any brand runs on Facebook and Instagram, from Claude, Codex or Cursor.

ResearchfacebookFacebook

Vimeo MCP server & CLI

Read transcripts, file videos into folders and add chapters from Claude, Codex or Cursor.

VideoVimeo

YouTube MCP server & CLI

Read any video's transcript, research channels and manage your own from Claude, Codex or Cursor.

VideoyoutubeYouTube

Telegram MCP server & CLI

Catch up, search years of chats and reply on Telegram from Claude, Codex or Cursor.

MessagingtelegramTelegram

Adobe Firefly MCP server & CLI

Generate and edit images with Image 5, make video and composite products from Claude, Codex or Cursor.

AI imagesAdobe Firefly

OP3 MCP server & CLI

Read your podcast's downloads, real listeners and retention from Claude, Codex or Cursor.

PodcastsOP3

Kit MCP server & CLI

Draft newsletters, manage subscribers and tags, and read your email stats from Claude, Codex or Cursor.

NewslettersKit

Beehiiv MCP server & CLI

Draft posts, manage subscribers and segments, and read your stats, from Claude, Codex or Cursor.

NewslettersBeehiiv

Circle MCP server & CLI

Manage members and spaces, draft posts, and run events and courses, from Claude, Codex or Cursor.

CommunitiesCircle

Calendly MCP server & CLI

Find open times, book and cancel meetings, and read meeting recaps, from Claude, Codex or Cursor.

SalesCalendly

Wistia MCP server & CLI

Upload and organize videos, fix captions and read your analytics, from Claude, Codex or Cursor.

VideoWistia

ScrapeCreators MCP server & CLI

Research public profiles, posts, transcripts and ads across social platforms, from Claude, Codex or Cursor.

Social mediaScrapeCreators

Shotstack MCP server & CLI

Render videos from templates, make AI clips and manage hosted files, from Claude, Codex or Cursor.

VideoShotstack

Gumloop MCP server & CLI

Run flows, work with your agents and search your Company Brain, from Claude, Codex or Cursor.

ProductivityGumloop

Buffer MCP server & CLI

Draft and schedule posts, manage your queues and read your analytics, from Claude, Codex or Cursor.

Social mediaBuffer

Cloudflare MCP server & CLI

Manage DNS records, clear the cache and change domain settings, from Claude, Codex or Cursor.

ProductivityCloudflare

Bannerbear MCP server & CLI

Make images, animations and videos from your templates, from Claude, Codex or Cursor.

AI imagesBannerbear

Brandfetch MCP server & CLI

Get any brand's logos, colors and fonts, and compare brands, from Claude, Codex or Cursor.

ResearchBrandfetch

Creatomate MCP server & CLI

Edit templates, check renders for free and make videos and images, from Claude, Codex or Cursor.

VideoCreatomate

Dub MCP server & CLI

Create short links, read clicks and sales, and run your partner program, from Claude, Codex or Cursor.

SalesDub

fal.ai MCP server & CLI

Find models, check prices, and generate images and videos, from Claude, Codex or Cursor.

Videofal.ai

Flodesk MCP server & CLI

Manage subscribers, segments and workflows, and draft campaigns, from Claude, Codex or Cursor.

SalesFlodesk

Fluent WordPress MCP server & CLI

Work with FluentCRM, FluentCommunity and Fluent Forms on your WordPress site, from Claude, Codex or Cursor.

SalesWordPress

Senja MCP server & CLI

Find, approve and tag testimonials, send invites and export them, from Claude, Codex or Cursor.

SalesSenja

Testimonial.to MCP server & CLI

Read, import and export your testimonials, and send request emails, from Claude, Codex or Cursor.

SalesTestimonial.to

Lemon Squeezy MCP server & CLI

Read and refund orders, manage subscriptions and check license keys, from Claude, Codex or Cursor.

SalesLemon Squeezy

Gumroad MCP server & CLI

Read sales and payouts, refund orders and manage products and license keys, from Claude, Codex or Cursor.

SalesGumroad

Fourthwall MCP server & CLI

Manage products and orders, ship them, and run promotions and giveaways, from Claude, Codex or Cursor.

SalesFourthwall

Teachable MCP server & CLI

Read your courses and student progress, and manage enrollments from Claude, Codex or Cursor.

SalesTeachable

Related free tools

All free tools

Bluesky character counter

Bluesky's 300-character limit, counted the way the protocol counts, with X and Threads beside it.

WritingblueskyBluesky

Bluesky post analyzer

Score a post against 114,949 real Bluesky posts, see what helped or hurt, and how any post did against its account's usual.

Social mediablueskyBluesky

Bluesky bio generator

Your Bluesky bio in the shapes the best Bluesky creators use, graded against them.

Social mediablueskyBluesky

Bluesky image resizer

Your photos in all 5 Bluesky sizes, each crop on your subject, in your browser.

blueskyBluesky

Engagement rate calculator

Any account's engagement rate by followers and by views, from a username or a link, against benchmarks for its size.

Social mediainstagramInstagramtiktokTikTok

Viral hook generator

10 viral hooks for any topic, each shaped like a real post that got 3 times its creator's usual likes. Free.

MarketinglinkedinLinkedInxX

Post image generator

Turn an X, LinkedIn, Threads or Substack post into a quote card, carousel or thread image, in every size, Pinterest and LinkedIn included.

DesignxXlinkedinLinkedIn

Share link generator

One text and one link become share links for every platform, with the preview card people will see.

Links and QRxXlinkedinLinkedIn

Social media post analyzer

Paste a link to a post on any of 7 platforms and see how it did against the account's typical post, and why.

Social mediaxXlinkedinLinkedIn

X character counter

Counts the way X counts: links as 23, emoji as 2. LinkedIn, Instagram, TikTok, Threads and YouTube limits too.

WritingblueskyBlueskyinstagramInstagram

LinkedIn character counter

LinkedIn's 3,000-character post limit, counted as you type, with X, Threads and Bluesky beside it.

WritinglinkedinLinkedIn

Threads character counter

Threads' 500-character limit, counted as you type, with X, Bluesky and LinkedIn beside it.

WritingthreadsThreads

Navid Moazzez

AI business strategist & AI OS builder

Navid Moazzez helps creators and founders master AI and build their own AI Operating System (AI OS) to automate their business and life.

Navid.me is reader-supported. When you buy through links on this site, I may earn an affiliate commission. Read the affiliate disclaimer.

Free AI newsletter

The most actionable AI newsletter for founders

Every week, get proven AI strategies, curated tools, and step-by-step systems to grow your audience, create better content, and build a profitable creator business.

No fluff, no filler, no BS. Just five minutes each week that might level up your online business and life.

P.S. Sign up now to get free access to my ultimate AI tools guide for creators.

Loved by 10,000+ readers
Loved by 10,000+ readers